How To Set Up Your Audio Technica At-Lp120-Usb Turntable For The Best Sound

Audio Technica AT LP120 USB test et avis sur cette platine vinyle from www.vinyle-actu.fr

Introduction

If you are a vinyl record enthusiast, you know that having the right turntable is essential for getting the best sound from your records. The Audio Technica AT-LP120-USB is one of the most popular turntables on the market, and for good reason. It is a high-quality turntable that is built to last, and it offers a range of features that make it perfect for both beginner and experienced vinyl enthusiasts. In this article, we will walk you through the process of setting up your Audio Technica AT-LP120-USB turntable to get the best sound possible.

Unboxing and Assembly

When you first receive your Audio Technica AT-LP120-USB turntable, it will come in a box that contains all of the components you need to set it up. The turntable itself will be separate from the base, so you will need to attach the turntable to the base using the screws provided. Once you have attached the turntable to the base, you can plug it in and turn it on.

Cartridge Installation

The next step is to install the cartridge onto the tonearm. The cartridge is the component that holds the needle, and it is responsible for picking up the sound from the grooves in the record. To install the cartridge, you will need to remove the stylus guard and align the cartridge with the tonearm. Once it is aligned, you can screw it into place using the screws provided.

Anti-Skate and Tracking Force

After you have installed the cartridge, you will need to set the anti-skate and tracking force. These settings are important because they ensure that the needle tracks properly in the grooves of the record. The anti-skate setting will prevent the needle from skipping, while the tracking force setting will ensure that the needle is pressing down on the record with the correct amount of force.

Setting the Speed

Once you have set the anti-skate and tracking force, you will need to set the speed of the turntable. The Audio Technica AT-LP120-USB turntable offers three different speeds: 33-1/3 RPM, 45 RPM, and 78 RPM. You can select the speed you need using the speed selector switch on the front of the turntable.

Connecting to Your Audio System

Once you have set up your turntable, you will need to connect it to your audio system. The Audio Technica AT-LP120-USB turntable comes with a built-in phono preamp, which means you can connect it directly to your amplifier or receiver. If your amplifier or receiver does not have a phono input, you can use the USB output to connect the turntable to your computer and use a software program to record your records.

Maintenance and Care

To ensure that your Audio Technica AT-LP120-USB turntable lasts for years to come, it is important to take good care of it. You should clean the stylus regularly using a stylus brush, and you should also clean the record platter and tonearm using a microfiber cloth. You should also avoid exposing the turntable to extreme temperatures or moisture, as this can damage the components.

Conclusion

Setting up your Audio Technica AT-LP120-USB turntable is a simple process that can be done in just a few steps. By following the instructions in this article, you can ensure that your turntable is set up correctly and that you are getting the best sound possible from your vinyl records. With proper maintenance and care, your turntable will provide you with years of enjoyment and high-quality sound.